The store will not work correctly when cookies are disabled.
Solid State Drives (SSD)
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | 2.5" |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 3.18 W |
| Power consumption (read) | 2.44 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 5 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Pro Series 128GB 2.5in SATA III 3D TLC SSD 6Gb/s 7mm | Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | 2.5" |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 3.18 W |
| Power consumption (read) | 2.44 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 5 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£21.62
£18.02 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| NAND flash type | TLC (Triple Level Cell) |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 120 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| NAND flash type | TLC (Triple Level Cell) |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | 2.5" |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 3.18 W |
| Power consumption (read) | 2.44 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 5 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Series 120GB 2.5in SATA III 3D TLC SSD 6Gb/s 7mm | Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| NAND flash type | TLC (Triple Level Cell) |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 120 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| NAND flash type | TLC (Triple Level Cell) |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | 2.5" |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 3.18 W |
| Power consumption (read) | 2.44 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 5 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£21.62
£18.02 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Compatible products | Dell Notebook |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Component for | Laptop |
| Product colour | Black, Metallic |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 2.5" |
| Compatible products | Dell Notebook |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| Product colour | Black, Metallic |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Packaging data |
|---|
| Storage drive adapter included | Yes |
| Packaging content |
|---|
| Storage drive adapter included | Yes |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Product colour | Black, Metallic |
Origin Storage 128GB 3DTLC SSD Latitude E6500 2.5in SATA MAIN/1ST BAY | Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Compatible products | Dell Notebook |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Component for | Laptop |
| Product colour | Black, Metallic |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 2.5" |
| Compatible products | Dell Notebook |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| Product colour | Black, Metallic |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Packaging data |
|---|
| Storage drive adapter included | Yes |
| Packaging content |
|---|
| Storage drive adapter included | Yes |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Product colour | Black, Metallic |
£42.70
£35.58 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Compatible products | Dell Notebook |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Component for | Laptop |
| Product colour | Aluminium, Black |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 2.5" |
| Compatible products | Dell Notebook |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| Product colour | Aluminium, Black |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Packaging data |
|---|
| Storage drive adapter included | Yes |
| Packaging content |
|---|
| Storage drive adapter included | Yes |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Product colour | Aluminium, Black |
Origin Storage 128GB SATA Latitude E6530 2.5in 3DTLC SSD Main/1st SATA Kit | Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Compatible products | Dell Notebook |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Component for | Laptop |
| Product colour | Aluminium, Black |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 2.5" |
| Compatible products | Dell Notebook |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| Product colour | Aluminium, Black |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Packaging data |
|---|
| Storage drive adapter included | Yes |
| Packaging content |
|---|
| Storage drive adapter included | Yes |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Product colour | Aluminium, Black |
£42.52
£35.43 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | Server/workstation |
| NVMe | No |
| Hot-swap | Yes |
| SSD capacity | 128 GB |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Compatible products | Dell Server |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Design |
|---|
| Component for | Server/workstation |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | Server/workstation |
| NVMe | No |
| Hot-swap | Yes |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Compatible products | Dell Server |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Packaging data |
|---|
| Storage drive adapter included | Yes |
| Packaging content |
|---|
| Storage drive adapter included | Yes |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Origin: SSD Hot Swap 128GB 3DTLC 2.5 inch (6.4cm) SATA | Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | Server/workstation |
| NVMe | No |
| Hot-swap | Yes |
| SSD capacity | 128 GB |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Compatible products | Dell Server |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Design |
|---|
| Component for | Server/workstation |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | Server/workstation |
| NVMe | No |
| Hot-swap | Yes |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Compatible products | Dell Server |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Packaging data |
|---|
| Storage drive adapter included | Yes |
| Packaging content |
|---|
| Storage drive adapter included | Yes |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£39.97
£33.31 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Compatible products | Dell Notebook |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Component for | Laptop |
| Product colour | Black, Metallic |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 2.5" |
| Compatible products | Dell Notebook |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| Product colour | Black, Metallic |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Packaging data |
|---|
| Storage drive adapter included | Yes |
| Packaging content |
|---|
| Storage drive adapter included | Yes |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Product colour | Black, Metallic |
Origin Storage 128GB 3DTLC SSD Latitude E6400 2.5in SATA MAIN/1ST BAY | Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Compatible products | Dell Notebook |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Component for | Laptop |
| Product colour | Black, Metallic |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 2.5" |
| Compatible products | Dell Notebook |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| Product colour | Black, Metallic |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Packaging data |
|---|
| Storage drive adapter included | Yes |
| Packaging content |
|---|
| Storage drive adapter included | Yes |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Product colour | Black, Metallic |
£38.84
£32.37 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | Server/workstation |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transmission |
|---|
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Design |
|---|
| Component for | Server/workstation |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | Server/workstation |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Cables included | SATA |
| Package type | Blister |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Cables included | SATA |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage 128GB 3DTLC SSD N/B Drive 2.5in SATA | Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | Server/workstation |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transmission |
|---|
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Design |
|---|
| Component for | Server/workstation |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | Server/workstation |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Cables included | SATA |
| Package type | Blister |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Cables included | SATA |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£21.62
£18.02 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Data transmission |
|---|
| Data transfer rate | 6 Gbit/s |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | Server/workstation |
| SSD capacity | 128 GB |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Component for | Server/workstation |
| SSD form factor | 2.5" |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | Server/workstation |
| SSD capacity | 128 GB |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 2.5" |
| Technical details |
|---|
| Interface | Serial ATA III |
| SSD form factor | 2.5" |
HP 932526-853 internal solid state drive 2.5" 128 GB Serial ATA III | Hard drive |
|---|
| SSD capacity | 128 GB |
| Data transmission |
|---|
| Data transfer rate | 6 Gbit/s |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | Server/workstation |
| SSD capacity | 128 GB |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Component for | Server/workstation |
| SSD form factor | 2.5" |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | Server/workstation |
| SSD capacity | 128 GB |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 2.5" |
| Technical details |
|---|
| Interface | Serial ATA III |
| SSD form factor | 2.5" |
£42.30
£35.25 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | TLC |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 520 MB/s |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | Server/workstation |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Read speed | 550 MB/s |
| Write speed | 520 MB/s |
| Memory type | TLC |
| Hardware encryption | No |
| Design |
|---|
| Component for | Server/workstation |
| SSD form factor | 2.5" |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | Server/workstation |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Read speed | 550 MB/s |
| Write speed | 520 MB/s |
| Memory type | TLC |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
Origin Storage Origin 2.5in 120 GB Serial ATA III TLC | Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | TLC |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 520 MB/s |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | Server/workstation |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Read speed | 550 MB/s |
| Write speed | 520 MB/s |
| Memory type | TLC |
| Hardware encryption | No |
| Design |
|---|
| Component for | Server/workstation |
| SSD form factor | 2.5" |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | Server/workstation |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Read speed | 550 MB/s |
| Write speed | 520 MB/s |
| Memory type | TLC |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
£21.62
£18.02 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hardware encryption | No |
| SSD form factor | 2.5" |
Origin Storage Origin 2.5in 120 GB Serial ATA III 3D TLC NAND | Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hardware encryption | No |
| SSD form factor | 2.5" |
£21.62
£18.02 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hardware encryption | No |
| SSD form factor | 2.5" |
Origin Storage Origin TLC830 Series 120GB 2.5in SATA III 3D TLC SSD 6Gb/s 7mm | Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hardware encryption | No |
| SSD form factor | 2.5" |
£21.62
£18.02 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | TLC |
| Internal | Yes |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | Laptop |
| NVMe | No |
| NAND flash type | TLC (Triple Level Cell) |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Memory type | TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Compatible products | Dell Notebook |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Internal | Yes |
| Component for | Laptop |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | Laptop |
| NVMe | No |
| NAND flash type | TLC (Triple Level Cell) |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Windows operating systems supported | Yes |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Linux operating systems supported | Yes |
| Memory type | TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 2.5" |
| Compatible products | Dell Notebook |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Internal memory type | TLC |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Packaging data |
|---|
| Storage drive adapter included | Yes |
| Packaging content |
|---|
| Storage drive adapter included | Yes |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Internal memory type | TLC |
| Internal | Yes |
Origin Storage 120GB TLC SSD Latitude E4300 2.5in SSD SATA MAIN/1ST BAY | Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | TLC |
| Internal | Yes |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | Laptop |
| NVMe | No |
| NAND flash type | TLC (Triple Level Cell) |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Memory type | TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Compatible products | Dell Notebook |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Internal | Yes |
| Component for | Laptop |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | Laptop |
| NVMe | No |
| NAND flash type | TLC (Triple Level Cell) |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Windows operating systems supported | Yes |
| Read speed | 550 MB/s |
| Write speed | 450 MB/s |
| Linux operating systems supported | Yes |
| Memory type | TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 2.5" |
| Compatible products | Dell Notebook |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Internal memory type | TLC |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Packaging data |
|---|
| Storage drive adapter included | Yes |
| Packaging content |
|---|
| Storage drive adapter included | Yes |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Internal memory type | TLC |
| Internal | Yes |
£44.78
£37.32 In stock
<
