The store will not work correctly when cookies are disabled.
Solid State Drives (SSD)
-
Hard drive |
---|
PCI Express interface data lanes | x4 |
SSD capacity | 128 GB |
Memory type | 3D TLC |
Access time | 0.2 ms |
Performance |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Interface | PCI Express 3.0 |
Component for | PC/Laptop |
NVMe | Yes |
Low-density parity-check (LDPC) | Yes |
TBW rating | 100 |
Hot-swap | No |
PCI Express interface data lanes | x4 |
SSD capacity | 128 GB |
S.M.A.R.T. support | Yes |
Read speed | 2100 MB/s |
TRIM support | Yes |
Write speed | 1900 MB/s |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 102000 IOPS |
Random read (4KB) | 179000 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 640 Gbit/s |
Access time | 0.2 ms |
Compatible products | Universal |
Data transmission |
---|
Read speed | 2100 MB/s |
Write speed | 1900 MB/s |
Random write (4KB) | 102000 IOPS |
Random read (4KB) | 179000 IOPS |
Data transfer rate | 640 Gbit/s |
Endurance |
---|
Mean time between failures (MTBF) | 1000000 h |
Design |
---|
Component for | PC/Laptop |
SSD form factor | M.2 |
System requirements |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Features |
---|
Interface | PCI Express 3.0 |
Component for | PC/Laptop |
NVMe | Yes |
Low-density parity-check (LDPC) | Yes |
TBW rating | 100 |
Hot-swap | No |
PCI Express interface data lanes | x4 |
SSD capacity | 128 GB |
Windows operating systems supported | Yes |
S.M.A.R.T. support | Yes |
Read speed | 2100 MB/s |
TRIM support | Yes |
Write speed | 1900 MB/s |
Linux operating systems supported | Yes |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 102000 IOPS |
Random read (4KB) | 179000 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 640 Gbit/s |
Access time | 0.2 ms |
SSD form factor | M.2 |
Compatible products | Universal |
Harmonized System (HS) code | 84717070 |
Power |
---|
Power consumption (average) | 3.03 W |
Power consumption (max) | 3.22 W |
Power consumption (write) | 3.22 W |
Power consumption (read) | 2.84 W |
Power consumption (idle) | 0.47 W |
Operating voltage | 3.3 V |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -45 - 105 °C |
Operating relative humidity (H-H) | 5 - 98% |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 36576 m |
Technical details |
---|
Interface | PCI Express 3.0 |
Hot-swap | No |
S.M.A.R.T. support | Yes |
Operating temperature (T-T) | 0 - 70 °C |
TRIM support | Yes |
Storage temperature (T-T) | -45 - 105 °C |
Operating relative humidity (H-H) | 5 - 98% |
ECC | Yes |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 36576 m |
Hardware encryption | No |
SSD form factor | M.2 |
Sustainability certificates | RoHS |
Software |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Weight & dimensions |
---|
Package type | Blister |
Packaging data |
---|
Storage drive adapter included | No |
Package type | Blister |
Screws included | No |
Packaging content |
---|
Storage drive adapter included | No |
Screws included | No |
Logistics data |
---|
Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Pro Series 128GB PCIe 3.0 NVMe M.2 80mm 3D TLC (ships as 256GB) Hard drive |
---|
PCI Express interface data lanes | x4 |
SSD capacity | 128 GB |
Memory type | 3D TLC |
Access time | 0.2 ms |
Performance |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Interface | PCI Express 3.0 |
Component for | PC/Laptop |
NVMe | Yes |
Low-density parity-check (LDPC) | Yes |
TBW rating | 100 |
Hot-swap | No |
PCI Express interface data lanes | x4 |
SSD capacity | 128 GB |
S.M.A.R.T. support | Yes |
Read speed | 2100 MB/s |
TRIM support | Yes |
Write speed | 1900 MB/s |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 102000 IOPS |
Random read (4KB) | 179000 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 640 Gbit/s |
Access time | 0.2 ms |
Compatible products | Universal |
Data transmission |
---|
Read speed | 2100 MB/s |
Write speed | 1900 MB/s |
Random write (4KB) | 102000 IOPS |
Random read (4KB) | 179000 IOPS |
Data transfer rate | 640 Gbit/s |
Endurance |
---|
Mean time between failures (MTBF) | 1000000 h |
Design |
---|
Component for | PC/Laptop |
SSD form factor | M.2 |
System requirements |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Features |
---|
Interface | PCI Express 3.0 |
Component for | PC/Laptop |
NVMe | Yes |
Low-density parity-check (LDPC) | Yes |
TBW rating | 100 |
Hot-swap | No |
PCI Express interface data lanes | x4 |
SSD capacity | 128 GB |
Windows operating systems supported | Yes |
S.M.A.R.T. support | Yes |
Read speed | 2100 MB/s |
TRIM support | Yes |
Write speed | 1900 MB/s |
Linux operating systems supported | Yes |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 102000 IOPS |
Random read (4KB) | 179000 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 640 Gbit/s |
Access time | 0.2 ms |
SSD form factor | M.2 |
Compatible products | Universal |
Harmonized System (HS) code | 84717070 |
Power |
---|
Power consumption (average) | 3.03 W |
Power consumption (max) | 3.22 W |
Power consumption (write) | 3.22 W |
Power consumption (read) | 2.84 W |
Power consumption (idle) | 0.47 W |
Operating voltage | 3.3 V |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -45 - 105 °C |
Operating relative humidity (H-H) | 5 - 98% |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 36576 m |
Technical details |
---|
Interface | PCI Express 3.0 |
Hot-swap | No |
S.M.A.R.T. support | Yes |
Operating temperature (T-T) | 0 - 70 °C |
TRIM support | Yes |
Storage temperature (T-T) | -45 - 105 °C |
Operating relative humidity (H-H) | 5 - 98% |
ECC | Yes |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 36576 m |
Hardware encryption | No |
SSD form factor | M.2 |
Sustainability certificates | RoHS |
Software |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Weight & dimensions |
---|
Package type | Blister |
Packaging data |
---|
Storage drive adapter included | No |
Package type | Blister |
Screws included | No |
Packaging content |
---|
Storage drive adapter included | No |
Screws included | No |
Logistics data |
---|
Harmonized System (HS) code | 84717070 |
£29.71
£24.76 In stock
-
Hard drive |
---|
SSD capacity | 128 GB |
Memory type | 3D TLC |
Access time | 0.1 ms |
Performance |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Low-density parity-check (LDPC) | Yes |
TBW rating | 50 |
Hot-swap | No |
SSD capacity | 128 GB |
S.M.A.R.T. support | Yes |
Read speed | 550 MB/s |
Write speed | 500 MB/s |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
Access time | 0.1 ms |
Compatible products | Universal |
Data transmission |
---|
Read speed | 550 MB/s |
Write speed | 500 MB/s |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Data transfer rate | 6 Gbit/s |
Endurance |
---|
Mean time between failures (MTBF) | 1000000 h |
Design |
---|
Component for | PC/Laptop |
SSD form factor | mSATA |
System requirements |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Low-density parity-check (LDPC) | Yes |
TBW rating | 50 |
Hot-swap | No |
SSD capacity | 128 GB |
Windows operating systems supported | Yes |
S.M.A.R.T. support | Yes |
Read speed | 550 MB/s |
Write speed | 500 MB/s |
Linux operating systems supported | Yes |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
Access time | 0.1 ms |
SSD form factor | mSATA |
Compatible products | Universal |
Harmonized System (HS) code | 84717070 |
Power |
---|
Power consumption (write) | 3.18 W |
Power consumption (read) | 2.44 W |
Power consumption (idle) | 0.52 W |
Operating voltage | 3.3 V |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -45 - 105 °C |
Operating relative humidity (H-H) | 5 - 98% |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 120000 m |
Technical details |
---|
Interface | Serial ATA III |
Hot-swap | No |
S.M.A.R.T. support | Yes |
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -45 - 105 °C |
Operating relative humidity (H-H) | 5 - 98% |
ECC | Yes |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 120000 m |
Hardware encryption | No |
SSD form factor | mSATA |
Sustainability certificates | RoHS |
Software |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Weight & dimensions |
---|
Package type | Blister |
Packaging data |
---|
Storage drive adapter included | No |
Package type | Blister |
Screws included | No |
Packaging content |
---|
Storage drive adapter included | No |
Screws included | No |
Logistics data |
---|
Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Pro Series 128GB MSATA 3D TLC SSD Hard drive |
---|
SSD capacity | 128 GB |
Memory type | 3D TLC |
Access time | 0.1 ms |
Performance |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Low-density parity-check (LDPC) | Yes |
TBW rating | 50 |
Hot-swap | No |
SSD capacity | 128 GB |
S.M.A.R.T. support | Yes |
Read speed | 550 MB/s |
Write speed | 500 MB/s |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
Access time | 0.1 ms |
Compatible products | Universal |
Data transmission |
---|
Read speed | 550 MB/s |
Write speed | 500 MB/s |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Data transfer rate | 6 Gbit/s |
Endurance |
---|
Mean time between failures (MTBF) | 1000000 h |
Design |
---|
Component for | PC/Laptop |
SSD form factor | mSATA |
System requirements |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Low-density parity-check (LDPC) | Yes |
TBW rating | 50 |
Hot-swap | No |
SSD capacity | 128 GB |
Windows operating systems supported | Yes |
S.M.A.R.T. support | Yes |
Read speed | 550 MB/s |
Write speed | 500 MB/s |
Linux operating systems supported | Yes |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
Access time | 0.1 ms |
SSD form factor | mSATA |
Compatible products | Universal |
Harmonized System (HS) code | 84717070 |
Power |
---|
Power consumption (write) | 3.18 W |
Power consumption (read) | 2.44 W |
Power consumption (idle) | 0.52 W |
Operating voltage | 3.3 V |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -45 - 105 °C |
Operating relative humidity (H-H) | 5 - 98% |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 120000 m |
Technical details |
---|
Interface | Serial ATA III |
Hot-swap | No |
S.M.A.R.T. support | Yes |
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -45 - 105 °C |
Operating relative humidity (H-H) | 5 - 98% |
ECC | Yes |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 120000 m |
Hardware encryption | No |
SSD form factor | mSATA |
Sustainability certificates | RoHS |
Software |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Weight & dimensions |
---|
Package type | Blister |
Packaging data |
---|
Storage drive adapter included | No |
Package type | Blister |
Screws included | No |
Packaging content |
---|
Storage drive adapter included | No |
Screws included | No |
Logistics data |
---|
Harmonized System (HS) code | 84717070 |
£23.96
£19.97 In stock
-
Hard drive |
---|
PCI Express interface data lanes | x4 |
SSD capacity | 120 GB |
Memory type | 3D TLC |
Access time | 0.2 ms |
Performance |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Interface | PCI Express 3.0 |
Component for | PC/Laptop |
NVMe | Yes |
Low-density parity-check (LDPC) | Yes |
TBW rating | 100 |
Hot-swap | No |
PCI Express interface data lanes | x4 |
SSD capacity | 120 GB |
S.M.A.R.T. support | Yes |
Read speed | 2100 MB/s |
TRIM support | Yes |
Write speed | 1900 MB/s |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 102000 IOPS |
Random read (4KB) | 179000 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 640 Gbit/s |
Access time | 0.2 ms |
Compatible products | Universal |
Data transmission |
---|
Read speed | 2100 MB/s |
Write speed | 1900 MB/s |
Random write (4KB) | 102000 IOPS |
Random read (4KB) | 179000 IOPS |
Data transfer rate | 640 Gbit/s |
Endurance |
---|
Mean time between failures (MTBF) | 1000000 h |
Design |
---|
Component for | PC/Laptop |
SSD form factor | M.2 |
System requirements |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Features |
---|
Interface | PCI Express 3.0 |
Component for | PC/Laptop |
NVMe | Yes |
Low-density parity-check (LDPC) | Yes |
TBW rating | 100 |
Hot-swap | No |
PCI Express interface data lanes | x4 |
SSD capacity | 120 GB |
Windows operating systems supported | Yes |
S.M.A.R.T. support | Yes |
Read speed | 2100 MB/s |
TRIM support | Yes |
Write speed | 1900 MB/s |
Linux operating systems supported | Yes |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 102000 IOPS |
Random read (4KB) | 179000 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 640 Gbit/s |
Access time | 0.2 ms |
SSD form factor | M.2 |
Compatible products | Universal |
Harmonized System (HS) code | 84717070 |
Power |
---|
Power consumption (average) | 3.03 W |
Power consumption (max) | 3.22 W |
Power consumption (write) | 3.22 W |
Power consumption (read) | 2.84 W |
Power consumption (idle) | 0.47 W |
Operating voltage | 3.3 V |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -45 - 105 °C |
Operating relative humidity (H-H) | 5 - 98% |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 36576 m |
Technical details |
---|
Interface | PCI Express 3.0 |
Hot-swap | No |
S.M.A.R.T. support | Yes |
Operating temperature (T-T) | 0 - 70 °C |
TRIM support | Yes |
Storage temperature (T-T) | -45 - 105 °C |
Operating relative humidity (H-H) | 5 - 98% |
ECC | Yes |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 36576 m |
Hardware encryption | No |
SSD form factor | M.2 |
Sustainability certificates | RoHS |
Software |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Weight & dimensions |
---|
Package type | Blister |
Packaging data |
---|
Storage drive adapter included | No |
Package type | Blister |
Screws included | No |
Packaging content |
---|
Storage drive adapter included | No |
Screws included | No |
Logistics data |
---|
Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Series 120GB PCIe 3.0 NVMe M.2 80mm Hard drive |
---|
PCI Express interface data lanes | x4 |
SSD capacity | 120 GB |
Memory type | 3D TLC |
Access time | 0.2 ms |
Performance |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Interface | PCI Express 3.0 |
Component for | PC/Laptop |
NVMe | Yes |
Low-density parity-check (LDPC) | Yes |
TBW rating | 100 |
Hot-swap | No |
PCI Express interface data lanes | x4 |
SSD capacity | 120 GB |
S.M.A.R.T. support | Yes |
Read speed | 2100 MB/s |
TRIM support | Yes |
Write speed | 1900 MB/s |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 102000 IOPS |
Random read (4KB) | 179000 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 640 Gbit/s |
Access time | 0.2 ms |
Compatible products | Universal |
Data transmission |
---|
Read speed | 2100 MB/s |
Write speed | 1900 MB/s |
Random write (4KB) | 102000 IOPS |
Random read (4KB) | 179000 IOPS |
Data transfer rate | 640 Gbit/s |
Endurance |
---|
Mean time between failures (MTBF) | 1000000 h |
Design |
---|
Component for | PC/Laptop |
SSD form factor | M.2 |
System requirements |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Features |
---|
Interface | PCI Express 3.0 |
Component for | PC/Laptop |
NVMe | Yes |
Low-density parity-check (LDPC) | Yes |
TBW rating | 100 |
Hot-swap | No |
PCI Express interface data lanes | x4 |
SSD capacity | 120 GB |
Windows operating systems supported | Yes |
S.M.A.R.T. support | Yes |
Read speed | 2100 MB/s |
TRIM support | Yes |
Write speed | 1900 MB/s |
Linux operating systems supported | Yes |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 102000 IOPS |
Random read (4KB) | 179000 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 640 Gbit/s |
Access time | 0.2 ms |
SSD form factor | M.2 |
Compatible products | Universal |
Harmonized System (HS) code | 84717070 |
Power |
---|
Power consumption (average) | 3.03 W |
Power consumption (max) | 3.22 W |
Power consumption (write) | 3.22 W |
Power consumption (read) | 2.84 W |
Power consumption (idle) | 0.47 W |
Operating voltage | 3.3 V |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -45 - 105 °C |
Operating relative humidity (H-H) | 5 - 98% |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 36576 m |
Technical details |
---|
Interface | PCI Express 3.0 |
Hot-swap | No |
S.M.A.R.T. support | Yes |
Operating temperature (T-T) | 0 - 70 °C |
TRIM support | Yes |
Storage temperature (T-T) | -45 - 105 °C |
Operating relative humidity (H-H) | 5 - 98% |
ECC | Yes |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 36576 m |
Hardware encryption | No |
SSD form factor | M.2 |
Sustainability certificates | RoHS |
Software |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Weight & dimensions |
---|
Package type | Blister |
Packaging data |
---|
Storage drive adapter included | No |
Package type | Blister |
Screws included | No |
Packaging content |
---|
Storage drive adapter included | No |
Screws included | No |
Logistics data |
---|
Harmonized System (HS) code | 84717070 |
£29.71
£24.76 In stock
-
Hard drive |
---|
SSD capacity | 128 GB |
Memory type | 3D TLC |
Data transmission |
---|
Read speed | 1860 MB/s |
Write speed | 600 MB/s |
Random write (4KB) | 105000 IOPS |
Random read (4KB) | 100000 IOPS |
Endurance |
---|
Mean time between failures (MTBF) | 1000000 h |
Performance |
---|
Interface | PCI Express 3.0 |
Component for | PC/Laptop |
NVMe | Yes |
TBW rating | 60 |
SSD capacity | 128 GB |
Read speed | 1860 MB/s |
Write speed | 600 MB/s |
Memory type | 3D TLC |
Random write (4KB) | 105000 IOPS |
Random read (4KB) | 100000 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Design |
---|
Component for | PC/Laptop |
SSD form factor | M.2 |
Features |
---|
Interface | PCI Express 3.0 |
Component for | PC/Laptop |
NVMe | Yes |
TBW rating | 60 |
SSD capacity | 128 GB |
Read speed | 1860 MB/s |
Write speed | 600 MB/s |
Memory type | 3D TLC |
Random write (4KB) | 105000 IOPS |
Random read (4KB) | 100000 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
SSD form factor | M.2 |
External DDR cache | No |
M.2 SSD size | 2280 (22 x 80 mm) |
Technical details |
---|
Interface | PCI Express 3.0 |
Hardware encryption | No |
SSD form factor | M.2 |
Weight & dimensions |
---|
Width | 80 mm |
Height | 3.15 mm |
Depth | 22 mm |
Innovation IT Performance M.2 128 GB PCI Express 3.0 3D TLC NVMe Hard drive |
---|
SSD capacity | 128 GB |
Memory type | 3D TLC |
Data transmission |
---|
Read speed | 1860 MB/s |
Write speed | 600 MB/s |
Random write (4KB) | 105000 IOPS |
Random read (4KB) | 100000 IOPS |
Endurance |
---|
Mean time between failures (MTBF) | 1000000 h |
Performance |
---|
Interface | PCI Express 3.0 |
Component for | PC/Laptop |
NVMe | Yes |
TBW rating | 60 |
SSD capacity | 128 GB |
Read speed | 1860 MB/s |
Write speed | 600 MB/s |
Memory type | 3D TLC |
Random write (4KB) | 105000 IOPS |
Random read (4KB) | 100000 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Design |
---|
Component for | PC/Laptop |
SSD form factor | M.2 |
Features |
---|
Interface | PCI Express 3.0 |
Component for | PC/Laptop |
NVMe | Yes |
TBW rating | 60 |
SSD capacity | 128 GB |
Read speed | 1860 MB/s |
Write speed | 600 MB/s |
Memory type | 3D TLC |
Random write (4KB) | 105000 IOPS |
Random read (4KB) | 100000 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
SSD form factor | M.2 |
External DDR cache | No |
M.2 SSD size | 2280 (22 x 80 mm) |
Technical details |
---|
Interface | PCI Express 3.0 |
Hardware encryption | No |
SSD form factor | M.2 |
Weight & dimensions |
---|
Width | 80 mm |
Height | 3.15 mm |
Depth | 22 mm |
£30.02
£25.02 In stock
-
Hard drive |
---|
SSD capacity | 128 GB |
Memory type | 3D TLC |
Access time | 0.1 ms |
Performance |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Low-density parity-check (LDPC) | Yes |
TBW rating | 50 |
Hot-swap | No |
SSD capacity | 128 GB |
S.M.A.R.T. support | Yes |
Read speed | 550 MB/s |
Write speed | 500 MB/s |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
Access time | 0.1 ms |
Compatible products | Universal |
Data transmission |
---|
Read speed | 550 MB/s |
Write speed | 500 MB/s |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Data transfer rate | 6 Gbit/s |
Endurance |
---|
Mean time between failures (MTBF) | 1000000 h |
Design |
---|
Component for | PC/Laptop |
SSD form factor | 2.5" |
System requirements |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Low-density parity-check (LDPC) | Yes |
TBW rating | 50 |
Hot-swap | No |
SSD capacity | 128 GB |
Windows operating systems supported | Yes |
S.M.A.R.T. support | Yes |
Read speed | 550 MB/s |
Write speed | 500 MB/s |
Linux operating systems supported | Yes |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
Access time | 0.1 ms |
SSD form factor | 2.5" |
Compatible products | Universal |
Harmonized System (HS) code | 84717070 |
Power |
---|
Power consumption (write) | 3.18 W |
Power consumption (read) | 2.44 W |
Power consumption (idle) | 0.52 W |
Operating voltage | 5 V |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Operating relative humidity (H-H) | 5 - 98% |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 120000 m |
Technical details |
---|
Interface | Serial ATA III |
Hot-swap | No |
S.M.A.R.T. support | Yes |
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Operating relative humidity (H-H) | 5 - 98% |
ECC | Yes |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 120000 m |
Hardware encryption | No |
SSD form factor | 2.5" |
Sustainability certificates | RoHS |
Software |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Weight & dimensions |
---|
Package type | Blister |
Packaging data |
---|
Storage drive adapter included | No |
Package type | Blister |
Screws included | No |
Packaging content |
---|
Storage drive adapter included | No |
Screws included | No |
Logistics data |
---|
Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Pro Series 128GB 2.5in SATA III 3D TLC SSD 6Gb/s 7mm Hard drive |
---|
SSD capacity | 128 GB |
Memory type | 3D TLC |
Access time | 0.1 ms |
Performance |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Low-density parity-check (LDPC) | Yes |
TBW rating | 50 |
Hot-swap | No |
SSD capacity | 128 GB |
S.M.A.R.T. support | Yes |
Read speed | 550 MB/s |
Write speed | 500 MB/s |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
Access time | 0.1 ms |
Compatible products | Universal |
Data transmission |
---|
Read speed | 550 MB/s |
Write speed | 500 MB/s |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Data transfer rate | 6 Gbit/s |
Endurance |
---|
Mean time between failures (MTBF) | 1000000 h |
Design |
---|
Component for | PC/Laptop |
SSD form factor | 2.5" |
System requirements |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Low-density parity-check (LDPC) | Yes |
TBW rating | 50 |
Hot-swap | No |
SSD capacity | 128 GB |
Windows operating systems supported | Yes |
S.M.A.R.T. support | Yes |
Read speed | 550 MB/s |
Write speed | 500 MB/s |
Linux operating systems supported | Yes |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
Access time | 0.1 ms |
SSD form factor | 2.5" |
Compatible products | Universal |
Harmonized System (HS) code | 84717070 |
Power |
---|
Power consumption (write) | 3.18 W |
Power consumption (read) | 2.44 W |
Power consumption (idle) | 0.52 W |
Operating voltage | 5 V |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Operating relative humidity (H-H) | 5 - 98% |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 120000 m |
Technical details |
---|
Interface | Serial ATA III |
Hot-swap | No |
S.M.A.R.T. support | Yes |
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Operating relative humidity (H-H) | 5 - 98% |
ECC | Yes |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 120000 m |
Hardware encryption | No |
SSD form factor | 2.5" |
Sustainability certificates | RoHS |
Software |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Weight & dimensions |
---|
Package type | Blister |
Packaging data |
---|
Storage drive adapter included | No |
Package type | Blister |
Screws included | No |
Packaging content |
---|
Storage drive adapter included | No |
Screws included | No |
Logistics data |
---|
Harmonized System (HS) code | 84717070 |
£21.62
£18.02 In stock
-
Hard drive |
---|
SSD capacity | 120 GB |
Memory type | 3D TLC |
Access time | 0.1 ms |
Performance |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Low-density parity-check (LDPC) | Yes |
NAND flash type | TLC (Triple Level Cell) |
TBW rating | 50 |
Hot-swap | No |
SSD capacity | 120 GB |
S.M.A.R.T. support | Yes |
Read speed | 550 MB/s |
Write speed | 500 MB/s |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
Access time | 0.1 ms |
Compatible products | Universal |
Data transmission |
---|
Read speed | 550 MB/s |
Write speed | 500 MB/s |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Data transfer rate | 6 Gbit/s |
Endurance |
---|
Mean time between failures (MTBF) | 1000000 h |
Design |
---|
Component for | PC/Laptop |
SSD form factor | 2.5" |
System requirements |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Low-density parity-check (LDPC) | Yes |
NAND flash type | TLC (Triple Level Cell) |
TBW rating | 50 |
Hot-swap | No |
SSD capacity | 120 GB |
Windows operating systems supported | Yes |
S.M.A.R.T. support | Yes |
Read speed | 550 MB/s |
Write speed | 500 MB/s |
Linux operating systems supported | Yes |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
Access time | 0.1 ms |
SSD form factor | 2.5" |
Compatible products | Universal |
Harmonized System (HS) code | 84717070 |
Power |
---|
Power consumption (write) | 3.18 W |
Power consumption (read) | 2.44 W |
Power consumption (idle) | 0.52 W |
Operating voltage | 5 V |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Operating relative humidity (H-H) | 5 - 98% |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 120000 m |
Technical details |
---|
Interface | Serial ATA III |
Hot-swap | No |
S.M.A.R.T. support | Yes |
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Operating relative humidity (H-H) | 5 - 98% |
ECC | Yes |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 120000 m |
Hardware encryption | No |
SSD form factor | 2.5" |
Sustainability certificates | RoHS |
Software |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Weight & dimensions |
---|
Package type | Blister |
Packaging data |
---|
Storage drive adapter included | No |
Package type | Blister |
Screws included | No |
Packaging content |
---|
Storage drive adapter included | No |
Screws included | No |
Logistics data |
---|
Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Series 120GB 2.5in SATA III 3D TLC SSD 6Gb/s 7mm Hard drive |
---|
SSD capacity | 120 GB |
Memory type | 3D TLC |
Access time | 0.1 ms |
Performance |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Low-density parity-check (LDPC) | Yes |
NAND flash type | TLC (Triple Level Cell) |
TBW rating | 50 |
Hot-swap | No |
SSD capacity | 120 GB |
S.M.A.R.T. support | Yes |
Read speed | 550 MB/s |
Write speed | 500 MB/s |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
Access time | 0.1 ms |
Compatible products | Universal |
Data transmission |
---|
Read speed | 550 MB/s |
Write speed | 500 MB/s |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Data transfer rate | 6 Gbit/s |
Endurance |
---|
Mean time between failures (MTBF) | 1000000 h |
Design |
---|
Component for | PC/Laptop |
SSD form factor | 2.5" |
System requirements |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Low-density parity-check (LDPC) | Yes |
NAND flash type | TLC (Triple Level Cell) |
TBW rating | 50 |
Hot-swap | No |
SSD capacity | 120 GB |
Windows operating systems supported | Yes |
S.M.A.R.T. support | Yes |
Read speed | 550 MB/s |
Write speed | 500 MB/s |
Linux operating systems supported | Yes |
ECC | Yes |
Memory type | 3D TLC |
Random write (4KB) | 56320 IOPS |
Random read (4KB) | 53760 IOPS |
Mean time between failures (MTBF) | 1000000 h |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
Access time | 0.1 ms |
SSD form factor | 2.5" |
Compatible products | Universal |
Harmonized System (HS) code | 84717070 |
Power |
---|
Power consumption (write) | 3.18 W |
Power consumption (read) | 2.44 W |
Power consumption (idle) | 0.52 W |
Operating voltage | 5 V |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Operating relative humidity (H-H) | 5 - 98% |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 120000 m |
Technical details |
---|
Interface | Serial ATA III |
Hot-swap | No |
S.M.A.R.T. support | Yes |
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Operating relative humidity (H-H) | 5 - 98% |
ECC | Yes |
Storage relative humidity (H-H) | 5 - 98% |
Operating shock | 1500 G |
Operating vibration | 16 G |
Maximum operating altitude | 120000 m |
Hardware encryption | No |
SSD form factor | 2.5" |
Sustainability certificates | RoHS |
Software |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Weight & dimensions |
---|
Package type | Blister |
Packaging data |
---|
Storage drive adapter included | No |
Package type | Blister |
Screws included | No |
Packaging content |
---|
Storage drive adapter included | No |
Screws included | No |
Logistics data |
---|
Harmonized System (HS) code | 84717070 |
£21.62
£18.02 In stock
-
Hard drive |
---|
SSD capacity | 128 GB |
Memory type | 3D TLC |
Performance |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Hot-swap | No |
SSD capacity | 128 GB |
Read speed | 500 MB/s |
Write speed | 500 MB/s |
Memory type | 3D TLC |
Hardware encryption | No |
Compatible products | Dell Desktop |
Data transmission |
---|
Read speed | 500 MB/s |
Write speed | 500 MB/s |
Design |
---|
Component for | PC/Laptop |
SSD form factor | 3.5" |
System requirements |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Hot-swap | No |
SSD capacity | 128 GB |
Windows operating systems supported | Yes |
Read speed | 500 MB/s |
Write speed | 500 MB/s |
Linux operating systems supported | Yes |
Memory type | 3D TLC |
Hardware encryption | No |
SSD form factor | 3.5" |
Compatible products | Dell Desktop |
Harmonized System (HS) code | 84717070 |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Technical details |
---|
Interface | Serial ATA III |
Hot-swap | No |
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Hardware encryption | No |
SSD form factor | 3.5" |
Sustainability certificates | RoHS |
Software |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Packaging data |
---|
Storage drive adapter included | Yes |
Packaging content |
---|
Storage drive adapter included | Yes |
Logistics data |
---|
Harmonized System (HS) code | 84717070 |
Origin Storage 128GB Desktop 3.5in SSD 3DTLC kit SSD 3DTLC Data cable/No rails SP Hard drive |
---|
SSD capacity | 128 GB |
Memory type | 3D TLC |
Performance |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Hot-swap | No |
SSD capacity | 128 GB |
Read speed | 500 MB/s |
Write speed | 500 MB/s |
Memory type | 3D TLC |
Hardware encryption | No |
Compatible products | Dell Desktop |
Data transmission |
---|
Read speed | 500 MB/s |
Write speed | 500 MB/s |
Design |
---|
Component for | PC/Laptop |
SSD form factor | 3.5" |
System requirements |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Hot-swap | No |
SSD capacity | 128 GB |
Windows operating systems supported | Yes |
Read speed | 500 MB/s |
Write speed | 500 MB/s |
Linux operating systems supported | Yes |
Memory type | 3D TLC |
Hardware encryption | No |
SSD form factor | 3.5" |
Compatible products | Dell Desktop |
Harmonized System (HS) code | 84717070 |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Technical details |
---|
Interface | Serial ATA III |
Hot-swap | No |
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Hardware encryption | No |
SSD form factor | 3.5" |
Sustainability certificates | RoHS |
Software |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Packaging data |
---|
Storage drive adapter included | Yes |
Packaging content |
---|
Storage drive adapter included | Yes |
Logistics data |
---|
Harmonized System (HS) code | 84717070 |
£39.13
£32.61 In stock
-
Hard drive |
---|
SSD capacity | 128 GB |
Memory type | 3D TLC |
Performance |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Hot-swap | No |
SSD capacity | 128 GB |
Read speed | 500 MB/s |
Write speed | 500 MB/s |
Memory type | 3D TLC |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
Compatible products | Dell Desktop |
Data transmission |
---|
Read speed | 500 MB/s |
Write speed | 500 MB/s |
Data transfer rate | 6 Gbit/s |
Design |
---|
Component for | PC/Laptop |
SSD form factor | 3.5" |
System requirements |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Hot-swap | No |
SSD capacity | 128 GB |
Windows operating systems supported | Yes |
Read speed | 500 MB/s |
Write speed | 500 MB/s |
Linux operating systems supported | Yes |
Memory type | 3D TLC |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
SSD form factor | 3.5" |
Compatible products | Dell Desktop |
Harmonized System (HS) code | 84717070 |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Technical details |
---|
Interface | Serial ATA III |
Hot-swap | No |
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Hardware encryption | No |
SSD form factor | 3.5" |
Sustainability certificates | RoHS |
Software |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Packaging data |
---|
Storage drive adapter included | Yes |
Packaging content |
---|
Storage drive adapter included | Yes |
Logistics data |
---|
Harmonized System (HS) code | 84717070 |
Origin Storage 128GB Desktop 3.5in SSD 3DTLC kit SSD 3DTLC Data cable/No rails Hard drive |
---|
SSD capacity | 128 GB |
Memory type | 3D TLC |
Performance |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Hot-swap | No |
SSD capacity | 128 GB |
Read speed | 500 MB/s |
Write speed | 500 MB/s |
Memory type | 3D TLC |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
Compatible products | Dell Desktop |
Data transmission |
---|
Read speed | 500 MB/s |
Write speed | 500 MB/s |
Data transfer rate | 6 Gbit/s |
Design |
---|
Component for | PC/Laptop |
SSD form factor | 3.5" |
System requirements |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Hot-swap | No |
SSD capacity | 128 GB |
Windows operating systems supported | Yes |
Read speed | 500 MB/s |
Write speed | 500 MB/s |
Linux operating systems supported | Yes |
Memory type | 3D TLC |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
SSD form factor | 3.5" |
Compatible products | Dell Desktop |
Harmonized System (HS) code | 84717070 |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Technical details |
---|
Interface | Serial ATA III |
Hot-swap | No |
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Hardware encryption | No |
SSD form factor | 3.5" |
Sustainability certificates | RoHS |
Software |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Packaging data |
---|
Storage drive adapter included | Yes |
Packaging content |
---|
Storage drive adapter included | Yes |
Logistics data |
---|
Harmonized System (HS) code | 84717070 |
£39.13
£32.61 In stock
-
Hard drive |
---|
SSD capacity | 120 GB |
Memory type | 3D TLC |
Performance |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Hot-swap | No |
SSD capacity | 120 GB |
S.M.A.R.T. support | Yes |
Read speed | 500 MB/s |
TRIM support | Yes |
Write speed | 500 MB/s |
Memory type | 3D TLC |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
Compatible products | Other Desktop |
Data transmission |
---|
Read speed | 500 MB/s |
Write speed | 500 MB/s |
Data transfer rate | 6 Gbit/s |
Design |
---|
Component for | PC/Laptop |
SSD form factor | 3.5" |
System requirements |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Hot-swap | No |
SSD capacity | 120 GB |
Windows operating systems supported | Yes |
S.M.A.R.T. support | Yes |
Read speed | 500 MB/s |
TRIM support | Yes |
Write speed | 500 MB/s |
Linux operating systems supported | Yes |
Memory type | 3D TLC |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
SSD form factor | 3.5" |
Compatible products | Other Desktop |
Harmonized System (HS) code | 84717070 |
Power |
---|
Power consumption (idle) | 325 W |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Technical details |
---|
Interface | Serial ATA III |
Hot-swap | No |
S.M.A.R.T. support | Yes |
Operating temperature (T-T) | 0 - 70 °C |
TRIM support | Yes |
Storage temperature (T-T) | -40 - 85 °C |
Hardware encryption | No |
SSD form factor | 3.5" |
Sustainability certificates | RoHS |
Software |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Packaging data |
---|
Storage drive adapter included | Yes |
Storage drive adapter type | 2.5" - 3.5" |
Cables included | SATA |
Storage drive external enclosure | Yes |
Packaging content |
---|
Storage drive adapter included | Yes |
Storage drive adapter type | 2.5" - 3.5" |
Cables included | SATA |
Storage drive external enclosure | Yes |
Logistics data |
---|
Harmonized System (HS) code | 84717070 |
Origin Storage 120GB Notebook 2.5in SSD kit with data cable and 2.5/3.5 adapter Hard drive |
---|
SSD capacity | 120 GB |
Memory type | 3D TLC |
Performance |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Hot-swap | No |
SSD capacity | 120 GB |
S.M.A.R.T. support | Yes |
Read speed | 500 MB/s |
TRIM support | Yes |
Write speed | 500 MB/s |
Memory type | 3D TLC |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
Compatible products | Other Desktop |
Data transmission |
---|
Read speed | 500 MB/s |
Write speed | 500 MB/s |
Data transfer rate | 6 Gbit/s |
Design |
---|
Component for | PC/Laptop |
SSD form factor | 3.5" |
System requirements |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
Hot-swap | No |
SSD capacity | 120 GB |
Windows operating systems supported | Yes |
S.M.A.R.T. support | Yes |
Read speed | 500 MB/s |
TRIM support | Yes |
Write speed | 500 MB/s |
Linux operating systems supported | Yes |
Memory type | 3D TLC |
Hardware encryption | No |
Data transfer rate | 6 Gbit/s |
SSD form factor | 3.5" |
Compatible products | Other Desktop |
Harmonized System (HS) code | 84717070 |
Power |
---|
Power consumption (idle) | 325 W |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Storage temperature (T-T) | -40 - 85 °C |
Technical details |
---|
Interface | Serial ATA III |
Hot-swap | No |
S.M.A.R.T. support | Yes |
Operating temperature (T-T) | 0 - 70 °C |
TRIM support | Yes |
Storage temperature (T-T) | -40 - 85 °C |
Hardware encryption | No |
SSD form factor | 3.5" |
Sustainability certificates | RoHS |
Software |
---|
Windows operating systems supported | Yes |
Linux operating systems supported | Yes |
Packaging data |
---|
Storage drive adapter included | Yes |
Storage drive adapter type | 2.5" - 3.5" |
Cables included | SATA |
Storage drive external enclosure | Yes |
Packaging content |
---|
Storage drive adapter included | Yes |
Storage drive adapter type | 2.5" - 3.5" |
Cables included | SATA |
Storage drive external enclosure | Yes |
Logistics data |
---|
Harmonized System (HS) code | 84717070 |
£29.74
£24.78 In stock
-
Hard drive |
---|
SSD capacity | 120 GB |
Memory type | 3D TLC |
Performance |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
SSD capacity | 120 GB |
Memory type | 3D TLC |
Hardware encryption | No |
Design |
---|
Component for | PC/Laptop |
SSD form factor | 2.5" |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
SSD capacity | 120 GB |
Memory type | 3D TLC |
Hardware encryption | No |
SSD form factor | 2.5" |
Technical details |
---|
Interface | Serial ATA III |
Hardware encryption | No |
SSD form factor | 2.5" |
Origin Storage Origin 2.5in 120 GB Serial ATA III 3D TLC NAND Hard drive |
---|
SSD capacity | 120 GB |
Memory type | 3D TLC |
Performance |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
SSD capacity | 120 GB |
Memory type | 3D TLC |
Hardware encryption | No |
Design |
---|
Component for | PC/Laptop |
SSD form factor | 2.5" |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
SSD capacity | 120 GB |
Memory type | 3D TLC |
Hardware encryption | No |
SSD form factor | 2.5" |
Technical details |
---|
Interface | Serial ATA III |
Hardware encryption | No |
SSD form factor | 2.5" |
£21.62
£18.02 In stock
-
Hard drive |
---|
SSD capacity | 120 GB |
Memory type | 3D TLC |
Performance |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
SSD capacity | 120 GB |
Memory type | 3D TLC |
Hardware encryption | No |
Design |
---|
Component for | PC/Laptop |
SSD form factor | 2.5" |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
SSD capacity | 120 GB |
Memory type | 3D TLC |
Hardware encryption | No |
SSD form factor | 2.5" |
Technical details |
---|
Interface | Serial ATA III |
Hardware encryption | No |
SSD form factor | 2.5" |
Origin Storage Origin TLC830 Series 120GB 2.5in SATA III 3D TLC SSD 6Gb/s 7mm Hard drive |
---|
SSD capacity | 120 GB |
Memory type | 3D TLC |
Performance |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
SSD capacity | 120 GB |
Memory type | 3D TLC |
Hardware encryption | No |
Design |
---|
Component for | PC/Laptop |
SSD form factor | 2.5" |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | No |
SSD capacity | 120 GB |
Memory type | 3D TLC |
Hardware encryption | No |
SSD form factor | 2.5" |
Technical details |
---|
Interface | Serial ATA III |
Hardware encryption | No |
SSD form factor | 2.5" |
£21.62
£18.02 In stock
-
Hard drive |
---|
SSD capacity | 128 GB |
Memory type | 3D TLC |
Data transmission |
---|
Read speed | 1775 MB/s |
Write speed | 550 MB/s |
Random write (4KB) | 105000 IOPS |
Random read (4KB) | 100000 IOPS |
Data transfer rate | 6 Gbit/s |
Performance |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | Yes |
DevSlp (device sleep) support | Yes |
SSD capacity | 128 GB |
S.M.A.R.T. support | Yes |
Read speed | 1775 MB/s |
TRIM support | Yes |
Write speed | 550 MB/s |
Memory type | 3D TLC |
Random write (4KB) | 105000 IOPS |
Random read (4KB) | 100000 IOPS |
Native Command Queuing (NCQ) | Yes |
Data transfer rate | 6 Gbit/s |
Design |
---|
Component for | PC/Laptop |
SSD form factor | M.2 |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | Yes |
DevSlp (device sleep) support | Yes |
SSD capacity | 128 GB |
S.M.A.R.T. support | Yes |
Read speed | 1775 MB/s |
TRIM support | Yes |
Write speed | 550 MB/s |
Memory type | 3D TLC |
Random write (4KB) | 105000 IOPS |
Random read (4KB) | 100000 IOPS |
Native Command Queuing (NCQ) | Yes |
Data transfer rate | 6 Gbit/s |
SSD form factor | M.2 |
Power |
---|
Power consumption (write) | 2.24 W |
Power consumption (read) | 2.67 W |
Power consumption (idle) | 0.49 W |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Technical details |
---|
Interface | Serial ATA III |
S.M.A.R.T. support | Yes |
Operating temperature (T-T) | 0 - 70 °C |
TRIM support | Yes |
Native Command Queuing (NCQ) | Yes |
Country of origin | China |
SSD form factor | M.2 |
Sustainability certificates | CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA |
Weight & dimensions |
---|
Package width | 65 mm |
Package depth | 120 mm |
Package height | 9 mm |
Package weight | 40 g |
Width | 65 mm |
Weight | 40 g |
Height | 9 mm |
Depth | 120 mm |
Packaging data |
---|
Package width | 65 mm |
Package depth | 120 mm |
Package height | 9 mm |
Package weight | 40 g |
Logistics data |
---|
Country of origin | China |
Other features |
---|
Country of origin | China |
V7 V7SSD128GBNV3E internal solid state drive M.2 128 GB Serial ATA III 3D TLC NVMe Hard drive |
---|
SSD capacity | 128 GB |
Memory type | 3D TLC |
Data transmission |
---|
Read speed | 1775 MB/s |
Write speed | 550 MB/s |
Random write (4KB) | 105000 IOPS |
Random read (4KB) | 100000 IOPS |
Data transfer rate | 6 Gbit/s |
Performance |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | Yes |
DevSlp (device sleep) support | Yes |
SSD capacity | 128 GB |
S.M.A.R.T. support | Yes |
Read speed | 1775 MB/s |
TRIM support | Yes |
Write speed | 550 MB/s |
Memory type | 3D TLC |
Random write (4KB) | 105000 IOPS |
Random read (4KB) | 100000 IOPS |
Native Command Queuing (NCQ) | Yes |
Data transfer rate | 6 Gbit/s |
Design |
---|
Component for | PC/Laptop |
SSD form factor | M.2 |
Features |
---|
Interface | Serial ATA III |
Component for | PC/Laptop |
NVMe | Yes |
DevSlp (device sleep) support | Yes |
SSD capacity | 128 GB |
S.M.A.R.T. support | Yes |
Read speed | 1775 MB/s |
TRIM support | Yes |
Write speed | 550 MB/s |
Memory type | 3D TLC |
Random write (4KB) | 105000 IOPS |
Random read (4KB) | 100000 IOPS |
Native Command Queuing (NCQ) | Yes |
Data transfer rate | 6 Gbit/s |
SSD form factor | M.2 |
Power |
---|
Power consumption (write) | 2.24 W |
Power consumption (read) | 2.67 W |
Power consumption (idle) | 0.49 W |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 70 °C |
Technical details |
---|
Interface | Serial ATA III |
S.M.A.R.T. support | Yes |
Operating temperature (T-T) | 0 - 70 °C |
TRIM support | Yes |
Native Command Queuing (NCQ) | Yes |
Country of origin | China |
SSD form factor | M.2 |
Sustainability certificates | CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA |
Weight & dimensions |
---|
Package width | 65 mm |
Package depth | 120 mm |
Package height | 9 mm |
Package weight | 40 g |
Width | 65 mm |
Weight | 40 g |
Height | 9 mm |
Depth | 120 mm |
Packaging data |
---|
Package width | 65 mm |
Package depth | 120 mm |
Package height | 9 mm |
Package weight | 40 g |
Logistics data |
---|
Country of origin | China |
Other features |
---|
Country of origin | China |
£21.82
£18.18 In stock
<