The store will not work correctly when cookies are disabled.
Solid State Drives (SSD)
-
![]()
| Hard drive |
|---|
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Access time | 0.2 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 2100 MB/s |
| Write speed | 1900 MB/s |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Data transfer rate | 640 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| SSD form factor | M.2 |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (average) | 3.03 W |
| Power consumption (max) | 3.22 W |
| Power consumption (write) | 3.22 W |
| Power consumption (read) | 2.84 W |
| Power consumption (idle) | 0.47 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Pro Series 128GB PCIe 3.0 NVMe M.2 80mm 3D TLC (ships as 256GB) | Hard drive |
|---|
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Access time | 0.2 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 2100 MB/s |
| Write speed | 1900 MB/s |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Data transfer rate | 640 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| SSD form factor | M.2 |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (average) | 3.03 W |
| Power consumption (max) | 3.22 W |
| Power consumption (write) | 3.22 W |
| Power consumption (read) | 2.84 W |
| Power consumption (idle) | 0.47 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£29.04
£24.20 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | mSATA |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | mSATA |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 3.18 W |
| Power consumption (read) | 2.44 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | mSATA |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Pro Series 128GB MSATA 3D TLC SSD | Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | mSATA |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | mSATA |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 3.18 W |
| Power consumption (read) | 2.44 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | mSATA |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£23.96
£19.97 In stock
-
![]()
| Hard drive |
|---|
| PCI Express interface data lanes | x4 |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Access time | 0.2 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 120 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 2100 MB/s |
| Write speed | 1900 MB/s |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Data transfer rate | 640 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 120 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| SSD form factor | M.2 |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (average) | 3.03 W |
| Power consumption (max) | 3.22 W |
| Power consumption (write) | 3.22 W |
| Power consumption (read) | 2.84 W |
| Power consumption (idle) | 0.47 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Series 120GB PCIe 3.0 NVMe M.2 80mm | Hard drive |
|---|
| PCI Express interface data lanes | x4 |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Access time | 0.2 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 120 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 2100 MB/s |
| Write speed | 1900 MB/s |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Data transfer rate | 640 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 120 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| SSD form factor | M.2 |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (average) | 3.03 W |
| Power consumption (max) | 3.22 W |
| Power consumption (write) | 3.22 W |
| Power consumption (read) | 2.84 W |
| Power consumption (idle) | 0.47 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£29.04
£24.20 In stock
-
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Data transmission |
|---|
| Read speed | 1860 MB/s |
| Write speed | 600 MB/s |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Performance |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| TBW rating | 60 |
| SSD capacity | 128 GB |
| Read speed | 1860 MB/s |
| Write speed | 600 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| Features |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| TBW rating | 60 |
| SSD capacity | 128 GB |
| Read speed | 1860 MB/s |
| Write speed | 600 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| SSD form factor | M.2 |
| External DDR cache | No |
| M.2 SSD size | 2280 (22 x 80 mm) |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Weight & dimensions |
|---|
| Width | 80 mm |
| Height | 3.15 mm |
| Depth | 22 mm |
Innovation IT Performance M.2 128 GB PCI Express 3.0 3D TLC NVMe | Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Data transmission |
|---|
| Read speed | 1860 MB/s |
| Write speed | 600 MB/s |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Performance |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| TBW rating | 60 |
| SSD capacity | 128 GB |
| Read speed | 1860 MB/s |
| Write speed | 600 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| Features |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| TBW rating | 60 |
| SSD capacity | 128 GB |
| Read speed | 1860 MB/s |
| Write speed | 600 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| SSD form factor | M.2 |
| External DDR cache | No |
| M.2 SSD size | 2280 (22 x 80 mm) |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Weight & dimensions |
|---|
| Width | 80 mm |
| Height | 3.15 mm |
| Depth | 22 mm |
£29.93
£24.94 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | 2.5" |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 3.18 W |
| Power consumption (read) | 2.44 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 5 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Pro Series 128GB 2.5in SATA III 3D TLC SSD 6Gb/s 7mm | Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | 2.5" |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 3.18 W |
| Power consumption (read) | 2.44 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 5 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£21.62
£18.02 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| NAND flash type | TLC (Triple Level Cell) |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 120 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| NAND flash type | TLC (Triple Level Cell) |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | 2.5" |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 3.18 W |
| Power consumption (read) | 2.44 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 5 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Series 120GB 2.5in SATA III 3D TLC SSD 6Gb/s 7mm | Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| NAND flash type | TLC (Triple Level Cell) |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 120 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| NAND flash type | TLC (Triple Level Cell) |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | 2.5" |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 3.18 W |
| Power consumption (read) | 2.44 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 5 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£21.62
£18.02 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Compatible products | Dell Desktop |
| Data transmission |
|---|
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 3.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | 3.5" |
| Compatible products | Dell Desktop |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | 3.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Packaging data |
|---|
| Storage drive adapter included | Yes |
| Packaging content |
|---|
| Storage drive adapter included | Yes |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage 128GB Desktop 3.5in SSD 3DTLC kit SSD 3DTLC Data cable/No rails SP | Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Compatible products | Dell Desktop |
| Data transmission |
|---|
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 3.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | 3.5" |
| Compatible products | Dell Desktop |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | 3.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Packaging data |
|---|
| Storage drive adapter included | Yes |
| Packaging content |
|---|
| Storage drive adapter included | Yes |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£39.13
£32.61 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Compatible products | Dell Desktop |
| Data transmission |
|---|
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 3.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 3.5" |
| Compatible products | Dell Desktop |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | 3.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Packaging data |
|---|
| Storage drive adapter included | Yes |
| Packaging content |
|---|
| Storage drive adapter included | Yes |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage 128GB Desktop 3.5in SSD 3DTLC kit SSD 3DTLC Data cable/No rails | Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Compatible products | Dell Desktop |
| Data transmission |
|---|
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 3.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 3.5" |
| Compatible products | Dell Desktop |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | 3.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Packaging data |
|---|
| Storage drive adapter included | Yes |
| Packaging content |
|---|
| Storage drive adapter included | Yes |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£39.13
£32.61 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 120 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 500 MB/s |
| TRIM support | Yes |
| Write speed | 500 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Compatible products | Other Desktop |
| Data transmission |
|---|
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 3.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 500 MB/s |
| TRIM support | Yes |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 3.5" |
| Compatible products | Other Desktop |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (idle) | 325 W |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | 3.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Packaging data |
|---|
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| Cables included | SATA |
| Storage drive external enclosure | Yes |
| Packaging content |
|---|
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| Cables included | SATA |
| Storage drive external enclosure | Yes |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage 120GB Notebook 2.5in SSD kit with data cable and 2.5/3.5 adapter | Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 120 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 500 MB/s |
| TRIM support | Yes |
| Write speed | 500 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Compatible products | Other Desktop |
| Data transmission |
|---|
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 3.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 500 MB/s |
| TRIM support | Yes |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 3.5" |
| Compatible products | Other Desktop |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (idle) | 325 W |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | 3.5" |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Packaging data |
|---|
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| Cables included | SATA |
| Storage drive external enclosure | Yes |
| Packaging content |
|---|
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| Cables included | SATA |
| Storage drive external enclosure | Yes |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£29.74
£24.78 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hardware encryption | No |
| SSD form factor | 2.5" |
Origin Storage Origin 2.5in 120 GB Serial ATA III 3D TLC NAND | Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hardware encryption | No |
| SSD form factor | 2.5" |
£21.62
£18.02 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hardware encryption | No |
| SSD form factor | 2.5" |
Origin Storage Origin TLC830 Series 120GB 2.5in SATA III 3D TLC SSD 6Gb/s 7mm | Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hardware encryption | No |
| SSD form factor | 2.5" |
£21.62
£18.02 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Data transmission |
|---|
| Read speed | 1775 MB/s |
| Write speed | 550 MB/s |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Data transfer rate | 6 Gbit/s |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | Yes |
| DevSlp (device sleep) support | Yes |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 1775 MB/s |
| TRIM support | Yes |
| Write speed | 550 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Native Command Queuing (NCQ) | Yes |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | Yes |
| DevSlp (device sleep) support | Yes |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 1775 MB/s |
| TRIM support | Yes |
| Write speed | 550 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Native Command Queuing (NCQ) | Yes |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | M.2 |
| Power |
|---|
| Power consumption (write) | 2.24 W |
| Power consumption (read) | 2.67 W |
| Power consumption (idle) | 0.49 W |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Native Command Queuing (NCQ) | Yes |
| Country of origin | China |
| SSD form factor | M.2 |
| Sustainability certificates | CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA |
| Compliance certificates | CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA |
| Weight & dimensions |
|---|
| Package width | 65 mm |
| Package depth | 120 mm |
| Package height | 9 mm |
| Package weight | 40 g |
| Width | 65 mm |
| Weight | 40 g |
| Height | 9 mm |
| Depth | 120 mm |
| Packaging data |
|---|
| Package width | 65 mm |
| Package depth | 120 mm |
| Package height | 9 mm |
| Package weight | 40 g |
| Logistics data |
|---|
| Country of origin | China |
| Other features |
|---|
| Country of origin | China |
V7 V7SSD128GBNV3E internal solid state drive M.2 128 GB Serial ATA III NVMe 3D TLC | Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Data transmission |
|---|
| Read speed | 1775 MB/s |
| Write speed | 550 MB/s |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Data transfer rate | 6 Gbit/s |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | Yes |
| DevSlp (device sleep) support | Yes |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 1775 MB/s |
| TRIM support | Yes |
| Write speed | 550 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Native Command Queuing (NCQ) | Yes |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | Yes |
| DevSlp (device sleep) support | Yes |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 1775 MB/s |
| TRIM support | Yes |
| Write speed | 550 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Native Command Queuing (NCQ) | Yes |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | M.2 |
| Power |
|---|
| Power consumption (write) | 2.24 W |
| Power consumption (read) | 2.67 W |
| Power consumption (idle) | 0.49 W |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Native Command Queuing (NCQ) | Yes |
| Country of origin | China |
| SSD form factor | M.2 |
| Sustainability certificates | CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA |
| Compliance certificates | CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA |
| Weight & dimensions |
|---|
| Package width | 65 mm |
| Package depth | 120 mm |
| Package height | 9 mm |
| Package weight | 40 g |
| Width | 65 mm |
| Weight | 40 g |
| Height | 9 mm |
| Depth | 120 mm |
| Packaging data |
|---|
| Package width | 65 mm |
| Package depth | 120 mm |
| Package height | 9 mm |
| Package weight | 40 g |
| Logistics data |
|---|
| Country of origin | China |
| Other features |
|---|
| Country of origin | China |
£21.94
£18.28 In stock
<
