The store will not work correctly when cookies are disabled.
Solid State Drives (SSD)
-
![]()
| Hard drive |
|---|
| PCI Express interface data lanes | x4 |
| SSD capacity | 256 GB |
| Memory type | 3D TLC |
| Access time | 0.2 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| NVMe version | 1.3 |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 256 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 1950 MB/s |
| Write speed | 1200 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 179200 IOPS |
| Random read (4KB) | 102400 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 8 Gbit/s |
| Access time | 0.2 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 1950 MB/s |
| Write speed | 1200 MB/s |
| Random write (4KB) | 179200 IOPS |
| Random read (4KB) | 102400 IOPS |
| Data transfer rate | 8 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| Market segment | Mobile |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| NVMe version | 1.3 |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 256 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 1950 MB/s |
| Write speed | 1200 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 179200 IOPS |
| Random read (4KB) | 102400 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 8 Gbit/s |
| Access time | 0.2 ms |
| SSD form factor | M.2 |
| Market segment | Mobile |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| M.2 SSD size | 2280 (22 x 80 mm) |
| Power |
|---|
| Power consumption (write) | 2.83 W |
| Power consumption (read) | 2.89 W |
| Power consumption (idle) | 0.48 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Market segment | Mobile |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Pro Series 256GB PCIe 3.0 NVMe M.2 80mm 3D TLC | Hard drive |
|---|
| PCI Express interface data lanes | x4 |
| SSD capacity | 256 GB |
| Memory type | 3D TLC |
| Access time | 0.2 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| NVMe version | 1.3 |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 256 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 1950 MB/s |
| Write speed | 1200 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 179200 IOPS |
| Random read (4KB) | 102400 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 8 Gbit/s |
| Access time | 0.2 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 1950 MB/s |
| Write speed | 1200 MB/s |
| Random write (4KB) | 179200 IOPS |
| Random read (4KB) | 102400 IOPS |
| Data transfer rate | 8 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| Market segment | Mobile |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| NVMe version | 1.3 |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 256 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 1950 MB/s |
| Write speed | 1200 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 179200 IOPS |
| Random read (4KB) | 102400 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 8 Gbit/s |
| Access time | 0.2 ms |
| SSD form factor | M.2 |
| Market segment | Mobile |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| M.2 SSD size | 2280 (22 x 80 mm) |
| Power |
|---|
| Power consumption (write) | 2.83 W |
| Power consumption (read) | 2.89 W |
| Power consumption (idle) | 0.48 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Market segment | Mobile |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£29.71
£24.76 In stock
-
![]()
| Hard drive |
|---|
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Access time | 0.2 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 2100 MB/s |
| Write speed | 1900 MB/s |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Data transfer rate | 640 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| SSD form factor | M.2 |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (average) | 3.03 W |
| Power consumption (max) | 3.22 W |
| Power consumption (write) | 3.22 W |
| Power consumption (read) | 2.84 W |
| Power consumption (idle) | 0.47 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Pro Series 128GB PCIe 3.0 NVMe M.2 80mm 3D TLC (ships as 256GB) | Hard drive |
|---|
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Access time | 0.2 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 2100 MB/s |
| Write speed | 1900 MB/s |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Data transfer rate | 640 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| SSD form factor | M.2 |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (average) | 3.03 W |
| Power consumption (max) | 3.22 W |
| Power consumption (write) | 3.22 W |
| Power consumption (read) | 2.84 W |
| Power consumption (idle) | 0.47 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£29.71
£24.76 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 512 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 200 |
| Hot-swap | No |
| SSD capacity | 512 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 58880 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 58880 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 200 |
| Hot-swap | No |
| SSD capacity | 512 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 58880 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | 2.5" |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 4.26 W |
| Power consumption (read) | 2.48 W |
| Power consumption (idle) | 0.47 W |
| Operating voltage | 5 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Pro Series 512GB 2.5in SATA III 3D TLC SSD 6Gb/s 7mm | Hard drive |
|---|
| SSD capacity | 512 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 200 |
| Hot-swap | No |
| SSD capacity | 512 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 58880 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 58880 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 200 |
| Hot-swap | No |
| SSD capacity | 512 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 58880 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | 2.5" |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 4.26 W |
| Power consumption (read) | 2.48 W |
| Power consumption (idle) | 0.47 W |
| Operating voltage | 5 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£39.66
£33.05 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 256 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| SSD capacity | 256 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| TRIM support | Yes |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| Product colour | Black |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| SSD capacity | 256 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| TRIM support | Yes |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | 2.5" |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (average) | 3.825 W |
| Power consumption (max) | 4.55 W |
| Power consumption (write) | 4.55 W |
| Power consumption (read) | 3.1 W |
| Power consumption (idle) | 0.54 W |
| Operating voltage | 5 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Hardware encryption | No |
| Product colour | Black |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Product colour | Black |
Origin Storage Inception TLC830 Pro Series 256GB 2.5in SATA III 3D TLC SSD 6Gb/s 7mm | Hard drive |
|---|
| SSD capacity | 256 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| SSD capacity | 256 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| TRIM support | Yes |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| Product colour | Black |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| SSD capacity | 256 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| TRIM support | Yes |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | 2.5" |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (average) | 3.825 W |
| Power consumption (max) | 4.55 W |
| Power consumption (write) | 4.55 W |
| Power consumption (read) | 3.1 W |
| Power consumption (idle) | 0.54 W |
| Operating voltage | 5 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Hardware encryption | No |
| Product colour | Black |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Product colour | Black |
£25.18
£20.98 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 512 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 512 GB |
| Read speed | 1600 MB/s |
| Write speed | 1000 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transmission |
|---|
| Read speed | 1600 MB/s |
| Write speed | 1000 MB/s |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 512 GB |
| Windows operating systems supported | Yes |
| Read speed | 1600 MB/s |
| Write speed | 1000 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage SSD 512GB 3D TLC M.2 80mm Class 20 SATA | Hard drive |
|---|
| SSD capacity | 512 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 512 GB |
| Read speed | 1600 MB/s |
| Write speed | 1000 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transmission |
|---|
| Read speed | 1600 MB/s |
| Write speed | 1000 MB/s |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 512 GB |
| Windows operating systems supported | Yes |
| Read speed | 1600 MB/s |
| Write speed | 1000 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£45.76
£38.13 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 512 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 200 |
| Hot-swap | No |
| SSD capacity | 512 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 58880 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 58880 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | mSATA |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 200 |
| Hot-swap | No |
| SSD capacity | 512 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 58880 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | mSATA |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 4.26 W |
| Power consumption (read) | 2.48 W |
| Power consumption (idle) | 0.47 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | mSATA |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Pro Series 512GB MSATA 3D TLC SSD | Hard drive |
|---|
| SSD capacity | 512 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 200 |
| Hot-swap | No |
| SSD capacity | 512 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 58880 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 58880 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | mSATA |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 200 |
| Hot-swap | No |
| SSD capacity | 512 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 58880 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | mSATA |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 4.26 W |
| Power consumption (read) | 2.48 W |
| Power consumption (idle) | 0.47 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | mSATA |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£56.98
£47.48 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 512 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 512 GB |
| Read speed | 530 MB/s |
| Write speed | 410 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transmission |
|---|
| Read speed | 530 MB/s |
| Write speed | 410 MB/s |
| Design |
|---|
| SSD form factor | mSATA |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 512 GB |
| Windows operating systems supported | Yes |
| Read speed | 530 MB/s |
| Write speed | 410 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | mSATA |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | mSATA |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage 512GB 3D TLC SSD mSATA | Hard drive |
|---|
| SSD capacity | 512 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 512 GB |
| Read speed | 530 MB/s |
| Write speed | 410 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transmission |
|---|
| Read speed | 530 MB/s |
| Write speed | 410 MB/s |
| Design |
|---|
| SSD form factor | mSATA |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 512 GB |
| Windows operating systems supported | Yes |
| Read speed | 530 MB/s |
| Write speed | 410 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | mSATA |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | mSATA |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£56.98
£47.48 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Windows 10, Windows 8.1 |
| Linux operating systems supported | Yes |
| Interface | PCI Express 3.0 |
| NVMe | Yes |
| NVMe version | 1.2 |
| NAND flash type | TLC (Triple Level Cell) |
| Sequential read speed (ATTO) | 1500 MB/s |
| Sequential write speed (ATTO) | 450 MB/s |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| TRIM support | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 110000 IOPS |
| Random read (4KB) | 91000 IOPS |
| Mean time between failures (MTBF) | 1500000 h |
| Data transmission |
|---|
| Random write (4KB) | 110000 IOPS |
| Random read (4KB) | 91000 IOPS |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1500000 h |
| Certificates |
|---|
| Certification | FCC, CE, BSMI, VCCI, KCC, EAC |
| Design |
|---|
| Product colour | Black |
| Certification | FCC, CE, BSMI, VCCI, KCC, EAC |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Windows 10, Windows 8.1 |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | PCI Express 3.0 |
| NVMe | Yes |
| NVMe version | 1.2 |
| NAND flash type | TLC (Triple Level Cell) |
| Sequential read speed (ATTO) | 1500 MB/s |
| Sequential write speed (ATTO) | 450 MB/s |
| SSD capacity | 128 GB |
| Windows operating systems supported | Windows 10, Windows 8.1 |
| S.M.A.R.T. support | Yes |
| TRIM support | Yes |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 110000 IOPS |
| Random read (4KB) | 91000 IOPS |
| Mean time between failures (MTBF) | 1500000 h |
| Certification | FCC, CE, BSMI, VCCI, KCC, EAC |
| SSD form factor | M.2 |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Current | 2.5 A |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| ECC | Yes |
| Product colour | Black |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Windows 10, Windows 8.1 |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Width | 22 mm |
| Weight | 10 g |
| Height | 2.3 mm |
| Depth | 80 mm |
| Packaging data |
|---|
| Package type | Blister |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Product colour | Black |
Lite-On MU X M.2 128 GB PCI Express 3.0 3D TLC NVMe | Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Windows 10, Windows 8.1 |
| Linux operating systems supported | Yes |
| Interface | PCI Express 3.0 |
| NVMe | Yes |
| NVMe version | 1.2 |
| NAND flash type | TLC (Triple Level Cell) |
| Sequential read speed (ATTO) | 1500 MB/s |
| Sequential write speed (ATTO) | 450 MB/s |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| TRIM support | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 110000 IOPS |
| Random read (4KB) | 91000 IOPS |
| Mean time between failures (MTBF) | 1500000 h |
| Data transmission |
|---|
| Random write (4KB) | 110000 IOPS |
| Random read (4KB) | 91000 IOPS |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1500000 h |
| Certificates |
|---|
| Certification | FCC, CE, BSMI, VCCI, KCC, EAC |
| Design |
|---|
| Product colour | Black |
| Certification | FCC, CE, BSMI, VCCI, KCC, EAC |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Windows 10, Windows 8.1 |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | PCI Express 3.0 |
| NVMe | Yes |
| NVMe version | 1.2 |
| NAND flash type | TLC (Triple Level Cell) |
| Sequential read speed (ATTO) | 1500 MB/s |
| Sequential write speed (ATTO) | 450 MB/s |
| SSD capacity | 128 GB |
| Windows operating systems supported | Windows 10, Windows 8.1 |
| S.M.A.R.T. support | Yes |
| TRIM support | Yes |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 110000 IOPS |
| Random read (4KB) | 91000 IOPS |
| Mean time between failures (MTBF) | 1500000 h |
| Certification | FCC, CE, BSMI, VCCI, KCC, EAC |
| SSD form factor | M.2 |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Current | 2.5 A |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| ECC | Yes |
| Product colour | Black |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Windows 10, Windows 8.1 |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Width | 22 mm |
| Weight | 10 g |
| Height | 2.3 mm |
| Depth | 80 mm |
| Packaging data |
|---|
| Package type | Blister |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Product colour | Black |
£35.89
£29.91 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 1 TB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 400 |
| Hot-swap | No |
| SSD capacity | 1 TB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 66560 IOPS |
| Random read (4KB) | 69120 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 66560 IOPS |
| Random read (4KB) | 69120 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | mSATA |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 400 |
| Hot-swap | No |
| SSD capacity | 1 TB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 66560 IOPS |
| Random read (4KB) | 69120 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | mSATA |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 4.26 W |
| Power consumption (read) | 2.8 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | mSATA |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Pro Series 1TB MSATA 3D TLC SSD | Hard drive |
|---|
| SSD capacity | 1 TB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 400 |
| Hot-swap | No |
| SSD capacity | 1 TB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 66560 IOPS |
| Random read (4KB) | 69120 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 66560 IOPS |
| Random read (4KB) | 69120 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | mSATA |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 400 |
| Hot-swap | No |
| SSD capacity | 1 TB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 66560 IOPS |
| Random read (4KB) | 69120 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | mSATA |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 4.26 W |
| Power consumption (read) | 2.8 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | mSATA |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£105.76
£88.13 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | mSATA |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | mSATA |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 3.18 W |
| Power consumption (read) | 2.44 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | mSATA |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Pro Series 128GB MSATA 3D TLC SSD | Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | mSATA |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | mSATA |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 3.18 W |
| Power consumption (read) | 2.44 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | mSATA |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£23.96
£19.97 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 1.92 TB |
| Memory type | 3D TLC |
| Data transmission |
|---|
| Read speed | 520 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 50000 IOPS |
| Random read (4KB) | 79000 IOPS |
| Data transfer rate | 6 Gbit/s |
| Security |
|---|
| Security algorithms | 256-bit AES |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| Controller type | Marvell 88SS1074 |
| NVMe | No |
| TBW rating | 800 |
| End-to-End Data Protection | Yes |
| SSD capacity | 1.92 TB |
| Security algorithms | 256-bit AES |
| Read speed | 520 MB/s |
| Write speed | 500 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 50000 IOPS |
| Random read (4KB) | 79000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | Yes |
| Data transfer rate | 6 Gbit/s |
| TCG Opal 2.0 | Yes |
| Self-Encrypting Drive (SED) | Yes |
| Design |
|---|
| Component for | PC/Laptop |
| Product colour | Black, Grey |
| SSD form factor | 2.5" |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| Controller type | Marvell 88SS1074 |
| NVMe | No |
| TBW rating | 800 |
| End-to-End Data Protection | Yes |
| SSD capacity | 1.92 TB |
| Security algorithms | 256-bit AES |
| Read speed | 520 MB/s |
| Write speed | 500 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 50000 IOPS |
| Random read (4KB) | 79000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | Yes |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 2.5" |
| TCG Opal 2.0 | Yes |
| Self-Encrypting Drive (SED) | Yes |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (average) | 0.5 W |
| Power consumption (write) | 2.32 W |
| Power consumption (read) | 1.17 W |
| Power consumption (idle) | 0.195 W |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating vibration | 2.17 G |
| Non-operating vibration | 20 G |
| Technical details |
|---|
| Interface | Serial ATA III |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating vibration | 2.17 G |
| Non-operating vibration | 20 G |
| Hardware encryption | Yes |
| Product colour | Black, Grey |
| SSD form factor | 2.5" |
| Weight & dimensions |
|---|
| Package type | Blister |
| Width | 100.1 mm |
| Weight | 52 g |
| Height | 7 mm |
| Depth | 69.8 mm |
| Packaging data |
|---|
| Package type | Blister |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Product colour | Black, Grey |
Kingston Technology UV500 2.5" 1.92 TB Serial ATA III 3D TLC | Hard drive |
|---|
| SSD capacity | 1.92 TB |
| Memory type | 3D TLC |
| Data transmission |
|---|
| Read speed | 520 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 50000 IOPS |
| Random read (4KB) | 79000 IOPS |
| Data transfer rate | 6 Gbit/s |
| Security |
|---|
| Security algorithms | 256-bit AES |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| Controller type | Marvell 88SS1074 |
| NVMe | No |
| TBW rating | 800 |
| End-to-End Data Protection | Yes |
| SSD capacity | 1.92 TB |
| Security algorithms | 256-bit AES |
| Read speed | 520 MB/s |
| Write speed | 500 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 50000 IOPS |
| Random read (4KB) | 79000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | Yes |
| Data transfer rate | 6 Gbit/s |
| TCG Opal 2.0 | Yes |
| Self-Encrypting Drive (SED) | Yes |
| Design |
|---|
| Component for | PC/Laptop |
| Product colour | Black, Grey |
| SSD form factor | 2.5" |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| Controller type | Marvell 88SS1074 |
| NVMe | No |
| TBW rating | 800 |
| End-to-End Data Protection | Yes |
| SSD capacity | 1.92 TB |
| Security algorithms | 256-bit AES |
| Read speed | 520 MB/s |
| Write speed | 500 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 50000 IOPS |
| Random read (4KB) | 79000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | Yes |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 2.5" |
| TCG Opal 2.0 | Yes |
| Self-Encrypting Drive (SED) | Yes |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (average) | 0.5 W |
| Power consumption (write) | 2.32 W |
| Power consumption (read) | 1.17 W |
| Power consumption (idle) | 0.195 W |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating vibration | 2.17 G |
| Non-operating vibration | 20 G |
| Technical details |
|---|
| Interface | Serial ATA III |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating vibration | 2.17 G |
| Non-operating vibration | 20 G |
| Hardware encryption | Yes |
| Product colour | Black, Grey |
| SSD form factor | 2.5" |
| Weight & dimensions |
|---|
| Package type | Blister |
| Width | 100.1 mm |
| Weight | 52 g |
| Height | 7 mm |
| Depth | 69.8 mm |
| Packaging data |
|---|
| Package type | Blister |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Product colour | Black, Grey |
£303.40
£252.83 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 256 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| TBW rating | 100 |
| Hot-swap | No |
| SSD capacity | 256 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| TRIM support | Yes |
| Write speed | 500 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| TBW rating | 100 |
| Hot-swap | No |
| SSD capacity | 256 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| TRIM support | Yes |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | 2.5" |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (average) | 3.825 W |
| Power consumption (max) | 4.55 W |
| Power consumption (write) | 4.55 W |
| Power consumption (read) | 3.1 W |
| Power consumption (idle) | 0.54 W |
| Operating voltage | 5 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage 240GB TLC SSD N/B Drive 2.5in SATA | Hard drive |
|---|
| SSD capacity | 256 GB |
| Memory type | 3D TLC |
| Access time | 0.1 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| TBW rating | 100 |
| Hot-swap | No |
| SSD capacity | 256 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| TRIM support | Yes |
| Write speed | 500 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | 2.5" |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| TBW rating | 100 |
| Hot-swap | No |
| SSD capacity | 256 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| TRIM support | Yes |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | 2.5" |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (average) | 3.825 W |
| Power consumption (max) | 4.55 W |
| Power consumption (write) | 4.55 W |
| Power consumption (read) | 3.1 W |
| Power consumption (idle) | 0.54 W |
| Operating voltage | 5 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Hardware encryption | No |
| SSD form factor | 2.5" |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£25.18
£20.98 In stock
<
