- flush-mounted termination unit with C6Amodule 270° - certified to GHMT Cat.6A re-embedded PVP - component testing for Cat.6A to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), certified to GHMT - compliance with class EA up to 500 MHz to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09 - tested: components up to 600 MHz, link up to 800 MHz - suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT - connection of data lines AWG 26/1 to 22/1 (solid wire) and AWG 26/7 to 22/7 (stranded wire) to insulation displacement connectors (IDC) - module plug direction 45° downwards - strain relief snapped on to stuffer cap - with label window for enclosed identification labels - label sheet 209 x 294 mm see accessories - integrated dust protection covers (also colored) - cover parts in pure white RAL 9010, structured surface with matt finish - compatible with "design" central units of switch lines (note: 3 port central units at present only available from JUNG) - suitable for mounting in standard flush-mounted and cavity wall casings! - variants: 1 port, 2 ports, 3 ports